ABS principle and use common sense
Automotive Wiper Parts is used on windscreen wiper system on automotive. it is one of the most important safety devices. It can make sure to remove the raindrops while driving in rainy days or remove snow while driving in snowy days, or remove the muddy water splashed on the windshield while driving on the muddy road, to promise the drivers to have good sight line so that the driving can be safe.
Wiper system is mainly composed of wiper arm assembly, wiper linkage, wiper brush, washing pump, liquid storage pot, fluid tube, nozzle etc. The Main function includes single step, intermittent shave, slow wiping, fast wiping and water spray. Automotive Wiper Parts Automotive Wiper Parts,Aluminum Die Casting Wiper Mount Head,Aluminum Die Casting Wiper Motor,Automotive Wiper Head NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , http://www.blcastings.com
1. When ABS is braked, the high-speed retracting operation of the brake cylinder will cause the high-pressure brake fluid to be frequently squeezed to generate a loud sound, and the brake pedal will also have jitter and top legs. Do not be bothered by this phenomenon while driving. In case of emergency, use ABS brakes without hesitation, and force the brakes to step in the end. Do not relax.
Second, since the wheels are not locked when the ABS is suddenly braked, the front wheels still have a guiding role. The driver can use the brakes to make emergency avoidance.
Third, the ABS system has a very high requirement for the brake fluid. Therefore, the addition of brake fluid should be strictly in accordance with the requirements of the operating instructions. It is generally forbidden to dope different types of brake fluid. In general, the same type of brake fluid should be replaced once a year. DOT3 or DOT4 alcohol based brake fluids are also available.
Fourth, ABS wheel sensors and ring gear are installed on each wheel, so always keep the sensor probe and ring gear clean, to prevent mud, oil, especially magnet material attached to its surface, resulting in sensor failure or loss The signal to the computer is incorrect and affects the normal operation of the ABS system.
V. Vehicles equipped with ABS systems should strictly follow the specified tire pressure standards, and at the same time maintain a balanced tire air pressure, it is strictly prohibited to use different specifications of tires. In addition, attention should be paid to checking the clearance between the wheel speed sensor probe and the ring gear. The axial clearance of the wheel bearing over the assembly will directly affect the normal operation of the ABS.
6. Drivers should always pay attention to the condition of the ABS warning light on the instrument panel when driving. If flicker or bright light is found, the ABS system has been out of working condition. At this moment, the brake system has returned to the normal brake working interface, the car can continue to drive, but it does not have ABS function, and it is recommended to repair it as soon as possible.