Led mobile advertising display more common fault

Although LED display screens are used in vehicles, the display screens of LED mobile advertising vehicles also belong to the electronic product category. Therefore, in the daily operation of LED mobile advertising vehicles, some misuse or other external factors, resulting in the LED screen shows a failure, how should we solve the screen fault?

1.jpg

The LED display screen of the LED mobile advertising car has several screens, and the fact that several other ones are not, in fact, is also a common situation, especially for those owners whose dishes are brought up for a short time. This is also quite obvious. If there is such a failure, there is no need to worry too much. When the LED screen is displayed in use, there are cases where individual screens do not light up, or when a full row of screens is not lit, don't be too alarmed. In fact, this is not a big problem with the quality of LED displays. It is also impossible for manufacturers to manufacture vehicles that have major defects. When the individual owners brought the vehicle back, because some people had to drive back more distance, and the speed is too fast, or because the driving section will be more bumpy, led LED mobile advertising LED display The power cord or the interface of the cable appeared to send points, resulting in a poorly connected screen that does not light up. It is only necessary to properly solve the situation after multiple power interfaces and cables are properly connected.

2.jpg

Another relatively long-standing situation is that the LED display of the LED mobile advertising car has a ghost and the speed of the screen shakes, and the progress of the screen displayed by the LED display does not conform to the inconsistency. Then you need to check whether the screens and the cables above the computer are all correctly connected. If the connection is loose, or the connection is wrong, insert it into the corresponding position again, or replace the network cable with a new one, the problems encountered will be solved.


60Mn material Forged Grinding Ball have very good wear resistance and not broken, special for big size Steel Balls, like 90mm and above. Breakage is lower than 1%, and it have high impact value. Jinan Zhongwei 60Mn Forged Steel Ball in the size ranging from 20mm to 140mm, which chemical composition: C:0.55-0.65, Si:0.17-0.37, Mn:0.7-1.0, Cr:≤0.25, P:<0.04, S:<0.04, and Hardness is 57 to 63HRC, mainly used to mining, cement plant and thermal power station.

60Mn Forged Grinding Steel Ball

Steel Grinding Ball,Forged Grinding Steel Ball,Grinding Media Forged Steel Balls,60Mn Forged Grinding Steel Ball

Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com