Research Progress of Graphene Black Phosphorus Planar Supercapacitors in Chinese Academy of Sciences

March 24 04:07:07, 2020

China Instrument Network Instrument R&D Recently, the team of Wu Zhongshuai, a two-dimensional material and energy device of the Dalian Institute of Chemical Physics, Chinese Academy of Sciences, teamed up with the research team of Ren Wencai of the Institute of Metal Research, Chinese Academy of Sciences to help prepare a one-step filtration method with a laminated structure. Vicryl phosphene and graphene composite microelectrode.

This electrode is directly transferred to a flexible substrate as a planar supercapacitor, exhibiting excellent energy density and good mechanical flexibility in ionic liquids. The relevant research results were published in the Nano Chemical Journal of the American Chemical Society.
The rapid development of wearable and portable electronic products has greatly promoted the modern society's demand for high energy density, lightweight and portable, flexible energy storage devices. Planar supercapacitors are considered to be important micro-power storage devices for integrated electronic devices due to their advantages of thin thickness, small size, high power density, long cycle life, and the like. It is necessary to develop a simple and efficient method for preparing high performance planar miniaturized supercapacitors.
The team used high-conductivity graphene nanosheets and high-capacity black phosphorene nanosheets as electrode materials. With the aid of parallel cross-templates, a single-step filtration method was used to construct a highly conductive graphene/black laminate structure. Phosphine-patterned composite microelectrodes, which are applied to planar supercapacitors, exhibit high operating voltage (3V) and energy density (11.6 mWh/cm3) in ionic liquids. In addition, the planar supercapacitor still maintains good performance in a highly curved state. This device processing strategy is not only simple and easy, but in the device preparation process does not need to join the conventional metal current collector, internal interconnection or contact body, can build modular devices, and then obtain high capacity and output voltage.
(Original Title: New Progress in the One-Step Preparation of Graphene Black Phosphor Planar Supercapacitors by Dalian Institute of Chemical Technology, Chinese Academy of Sciences)

Plastic & Rubber Processing Machinery refers to general machinery, which manufacture and processing of rubber and plastic products.

The manchinery is used for EVA, PVC PE fpaming sole, rubber sole, TPR sole, rubber robber, rubber sponge, tyre, ball, rubber ring, rubber pipe, rubber belt, bottl stopper,oil seal, shock-resistant rubber, viscous adhesive tape, elastic tape, masterbatch, ink, electric rubber part, auto rubber product and chemical industrial blending materials.

18 inch refining mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.

The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter:

Roller diameter (mm)

450

Roller length(mm)

1000

Front roller speed (m/min)

31.9

Speed ratio

1:1.27

Max roller gap(mm)

10

Nip adjustment

Manual

Mixing capacity(kg)

30-50

Power (kw)

55

Motor RPM(r/min)

980

Reducer ratio

35

Reducer model

375+

Gear width

input 70mm, output 140mm

Roller bearing diameter(mm)

300

Bearing model

352960YF

Bearing size(mm)

420×300×192

Machine size(mm)

4700x2000x1700

Machine weight(kg)

10000

Plastic & Rubber Processing Machinery

Plastic Processing Machinery,Rubber Processing Machinery,Processing Machine For Plastic,Processing Machine For Rubber

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com