Full Automatic Ribbon Wire Cutting Stripping and Crimping Machine
Xiamen AOSIF Engineering Ltd , http://www.fj-generator.com
Full Automatic Double Ends Flat Cable Terminal Crimping Machine
Product introductionÂ
the machine has multi functions that pre-feeding, cutting, stripping and crimping. As the traditional type, it is operated by manual which is low in working efficiency and unstable in quality, in the meantime, the operator is easy to be tired while repeat doing the same work all the time. Our company has involved in The industry for many years and accumulated rich technology and experience. After two years development and research, our company produces the full automatic wire terminal crimping machine to provide the best machine for wire processing industry.
Product features:
1. Wide application range: it is mainly used for crimping PH,XH,EH,ZH and Other color wires      communication terminals, SCN, SM,VH, Dupont and other terminals for stripping connector.
Cost saving: pre-feeding in the front section and different wire comes from the rear section. The whole procedure is full automatic.
2. Good working stability: the crimping structure is made of eccentric gear and cam, so the crimping pressure is even that the processed terminals are tide, and its quality is very stable. The operation of the machine is stable and high in efficient.
3. High precision: it uses the stepping motor to control the wire cutting, stripping length, and the precision could reach to 0.1mm.
Precise position: it uses the imported servo motor to control the move of the wire, which is precise in crimping the terminals, and ensure the conductivity of the wires.
4. Various type of terminal crimping: it uses the steering structure. It can change the crimping direction for the terminals at the two ends. .
5. Full automatic: full automatic production to save the labor cost. The procedures of pre-feeding, cutting, stripping, terminals crimping are full automatic.
Less area occupy: each machine occupies less than 2.5m2, sometimes it saves the rent of the factory.
6. High efficiency:production capacity: 18000PCS/H(MAX), the machine can be operated continuously for 24hours.
7. Easy adjustment: the crew just needs simple training and then is able to operate several machines at the same time.Â
8. Easy operation: it uses touching screen, the parameters setting and operation are easy to grasp.
Company and working shop
Technical parameters:
 1.Applicable wire: all kinds of wire
2.The max.P wire row: 20 P
3.The max.Width wire displacement: 28 mm
4.The width range of the single wire: 0.8-2.5mm
5.Cutting length: 72-9999mm
6.Cutting precision: ±0.5mm
7.Stripping length on the two ends: 2-10mm
8.Working capacity: 18000 PCS/H (20P wire rows)
9.Function: single terminal crimping, double terminals crimping, interval crimping, front and rear crimping.
10.Die: changeable
11.Working pressure: 0.4-0.6 mpa, the air source should be filtered and dried.
12.Voltage: 220V 50Hz
13.Rated current: 15A
14.Power: 3300W
15.Outer dimension: 1.85m x 0.76m x 1.83m
16.Weight: 527 kg
17.Occupied area: 2 x 2.5m
Â
Shanghai exhibition
Certification
If you have any question ,you can feel free to contact us.
Â