Cbvac Special Pump Avt Rotary Vane Vacuum Pump

April 04 16:08:24, 2020

  • Oil or Not: Oil
  • Exhauster Method: Entrapment Vacuum Pump
  • Work Function: Fore Pump
  • Trademark: cbvac
  • Origin: China
  • Structure: Rotary Vacuum Pump
  • Vacuum Degree: Low Vacuum
  • Working Conditions: Dry
  • Transport Package: Wooden Box
2-STAGE ROTARY VANE VACUUM PUMP
AVR - 10 (16) is a two-stage straight rotary vane vacuum pump (hereinafter referred to as the pump).The pump is mainly composed of drive motor and pump body of two parts.Directly coupling drive motor and pump body, pump and motor shaft by the elastic coupling, the fan is mounted on the shaft coupling, by cooling around the coupling aperture and pump body even in extreme conditions can maintain at a low temperature, combining with the fin on the pump body, make full use of air cooling and oil cooling to get heat dissipation.For oil pump internal all bearing lubrication of the sliding bearing.Pump body composed of o-rings seal assembly, all parts are used in order to remove the locating pin connection, the pump body is easy to remove the and do not need special tools, convenient repair and maintenance.
 
    model AVR-10 AVR-16

Pumping rate 		m3/h
(L/min) 		50Hz 10(167) 16(267)
60Hz 12(200) 18(300)

Extreme pressure 		Pa Open gas ballasing 5.0
close gas ballasing 5×10-1

Motor power 		kW Three -phase 0.4 0.55
Single -phase 0.55
Voltage V Three -phase 380,400
Single -phase 220,230
Noise dB close gas ballasing ≤50 ≤50
Oil mass needed L 1.1 1.2
,Inlet and outlet adaptor KF 25
Cooling way - Air cooling
Ambient temperature ºC 5~40
weight kg 25 27

Cbvac Special Pump Avt Rotary Vane Vacuum Pump
Cbvac Special Pump Avt Rotary Vane Vacuum Pump
 

Wire Grinding Machine

recycle copper wire

Voltage:380V -50Hz
Power:37KW
Measurement:L2100×W2000×H2200
Weight:2.8t
Output:400KG/hour.

Please clear up iron from the mixed cables, infeed according to the crusher `s capacity.The crusher will chop the scrap wires into granules.

if any abnormal noise,please stop and open the crusher , inspecting or changing screen,if any part run hot,please stop it and inspect.

Matters needing attention:

*Please inspect all the plants before working and after working, inspect whether the belts/nuts to become loosened or disengaged,add lubricating oil to bearing block.
*please wear mask, gloves on working time.
*Never put your hands into the shield when the machine working,keep child away from the machine.

Cable Grinding Machine

Copper Wire Granulator, Cable Grinding Machine

TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com