Aerated Autoclave Concrete Block AAC Block Machine
             Â
M-BUS metering data converter is with M-BUS and
USB interface, which is collected with M-BUS meters and meter reading primary
station separately. The communication with M-BUS meters is based on tree
collection. This data concentrator is single non-communication converter, supporting
data transmission and sending reading orders through USB collection. The quantity to collect with the meters(Meters Data Transceiver) is 60pcs and 360pcs.
Function of the M-Bus Converter:
Working
voltage:AC220V
Power:10W
Interface: up:USB
down:M-BUS
Quantity:≤60pcs,360pcs
VBUS:high level 39V,low level 23V
BUS
load current:≤200mA
Path
protection:over current,short cut protection,reset automatically when failure deleted; need
man resetting when long-time over current
Status
indicator: power; receiving and sending; over load warning
wiring:0.75mm2~2mm2;wire
resistance≤50Ω
transmission
:1000meters
working
environment:temperature:-30℃~80℃
humidity:≤90
M-Bus Converter M-Bus Converter,Wireless M-Bus Converter,Wireless Meter Reader,M-Bus Connector,Data Concentrator,Metering Data Converter,Meters Data Transceiver Berggruen Technology Co.,Ltd , https://www.meter-technology.com
Dongyue is specialising in AAC Plant for more than 18 years,with good quality and competitive price,have office in India,Indonesia,Vietnam,more than 30 lines overseas.And we are cooperating with German Company.
1. Our Aerated Autoclave Concrete Block AAC Block Machine unique advantage
(1) Our company is famous and Specializing in producing AAC block machinery about 10 years, we have 15 sets AAC plant in Indonesia, 10 sets in India. 5 sets in Vietnam, 2 sets in Burma, 2 lines in Mongolia, 1 line in Kazakhstan, 1 one in
Bulgaria, so we have much experience to set up AAC production line in worldwide.
We also have office in India and Indonesia, Vietnam to supply the after service and spare parts.
(2) We are the top leader in China on manufacturing the Autoclaved Aerated Concrete Line (AAC). We have set up about 200 AAC block production line in China domestic market.
(3) We have cooperated with Germany company AAC CONCEPT GMBH about technique transfer, Our AAC block machine inherits Germany technology.
(4) We have our company own AAC production line, so clients can send their engineer or technical worker to be trained in our AAC plant workshop.
2. Aerated Autoclave Concrete Block AAC Block Machine AAC block advantages
(1)light weight
Aerated concrete density is usually 400-700kg/m3, (according the market in produce ), same as 1/3 of clay brick and 1/5 common concrete. So use the Light brick can reduce the weight of the build more, and also reduce the beam of roof and pillar press best. Then you can see, it can save the material and cost, it also fighting shaking.
(2) keeping temperature
It has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or1/5 of clay brick, so it is best materials now in the world. There are many kinds material, have lowest waste.
(3)High Strength
High pressure steam-curing autoclaving process gives AAC unmatchable strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements
(4)Cost saving
Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving. Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%
3. AAC block Aerated Autoclave Concrete Block AAC Block Machine Market Analysis
AAC is becoming more and more popular around the world, from western countries and then to developing countries. Below Properties make AAC have unmatchable property, especially for high buildings:
1) Extreme Light Weight
2) Large Variety of Sizes
3) High Fire Resistant
4) Excellent Thermal Insulation
5) Great Sound Insulation
6) Moisture Protection
7) Termite Resistant
8) High Workability and Easy Processing
4. Aerated Autoclave Concrete Block AAC Block Machine transportation
1. Normally Cutting machine, boiler will be shipped by flat rack
2. Autoclaves are shipped by bulk cargo
3. The other parts will be contained in container.